Memory controller hub chipset for communications, embedded, and storage applications 40 pages. After installing the Micron RAM, the DEEA performance proved to be on par with the other boards, although the memory bandwidth scores lagged a tad. On the other hand, motherboards are relatively inexpensive, so you can start with a modest budget and move up later. Technical Reference Midboard Connectors Figure 22 shows the location of the midboard connectors. Don’t show me this message again. Documentation was adequate for installing and setting up the board, though it could have been a bit clearer on the FSB setting jumper.
|Date Added:||28 December 2017|
|File Size:||13.21 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
To create a bootable diskette using a non-DOS system: The performance of this board was pretty much on a par with the other motherboards. When a card is inserted into the AGP slot, the integrated graphics of the E are automatically disabled.
By pressing ‘print’ button you will print only current page. Like many modern motherboards, you set the clock rate in the system BIOS.
Intel D815EEA, Socket 370 (BOXD815EEAA) Motherboard
When using notched cards, install the AGP card retention mechanism before installing the card. The DEEA certainly proved to be a solid, stable platform, running all our tests with aplomb.
Place the desktop board on top of the bag component-side up.
I haven’t received it yet, but I have a couple of questions. You do not have the required permissions to view the files attached to this post.
Intel supplies some useful utilities, including a Windows-based BIOS update tool that works quite well and is much easier to use than the DOS-based version. This menu reports processor and memory information and is for configuring the system date and system time. One interesting feature of this Intel board is the presence of a DVI connector directly on the motherboard. If used, mechanically precludes the use of Inte, slot 5.
Installing and Replacing Desktop Board Components Clearing the Passwords This procedure assumes that the desktop board is installed in the computer and motherobard configuration jumper block is set to normal mode. The outermost of the six PCI slots is somewhat thinner than the rest—to better facilitate slot sharing with the lone CNR slot.
Documentation is good, though quite dense. I hope you will have a great time with your new board.
VOGONS • View topic – Gateway a.k.a. Intel DEEA
Connect the processor fan cable to the processor fan connector see Figure I only have the board made by Intel specifically. An array of four LEDs gives additional diagnostic information during system boot to aid in troubleshooting. It is capable of connecting two drives to the desktop board. However, both variants of the support a discrete AGP slot. Personally I do not know if a fan is required, it should d815wea a fan as such, and I would allways run a fan.
The E and EP are each two-chip solutions.
Intel D815EEA Product Manual
Layout a bit awkward Rating: I have the deea2 variant, and as far as I have read. Looks like the latest gateway bios is EAA.
Don’t have an account? Intel manufactures the motherboards for several large PC manufacturers, including Dell and Gateway. In the end, this motherboard is a decent solution for system integrators and white box shops v815eea value stability and Intel support above performance and cost.
After installing the Micron RAM, the DEEA performance proved to be on par with the other boards, although the memory bandwidth scores lagged a tad. EXE file and type: And all the while, it was stable, mofherboard nary a crash nor glitch in sight.
Newer cards have a retention notch as shown in Figure 3.